Wired2Serve Blog

Wiredblog_waycornerpatch_-_Copy

4 Unexpected Ways Your Fleet Is Wasting Fuel

Posted by G. Christianson on Mar 29, 2016 12:46:10 PM

fuel_wasting.jpgFleets are always thirsty for fuel. Even with the stunning advances made in fuel efficiency for industrial vehicles, from tractor trailers to agricultural equipment, everybody wants to get more out of every last drop in the tank. And you can always get at least a little bit more out of your fuel budget, especially from the electrical system, if you know where to look.

 

 

 

Mind Your Connections

Cleaning your fleet should involve more than a quick power wash of the outside and a quick look at the undercarriage. Make sure that your shop is opening up every vehicle during routine checks and looking at the connections in each, and that they're taking a moment to clean those connections and make sure none of them are loose or damaged. Dirt and grease on electrical connections reduces fuel efficiency but loose connections can be outright dangerous. This is especially true in wintry areas, where you have the added problem of salt and weather corrosion; when the snow flies, tighten up the inspection schedule.

Automate

One of the biggest problems in fuel efficiency is the little "leaks" -- the batteries connected to the various parts of the cabin or the trailer that don't need a lot of charging, but keep pulling volts well after they're completely topped off. Inverters, lift-gate systems, and warehouse tools like pallet jacks are the most common suspects, but a quick audit of your fleet will likely turn up more. Most of these can have automatic shut-offs and other useful logic circuitry installed so that once they have the power they need, they stop sipping from your fleet's fuel budget. And it will have the added advantage of extending battery life on these tools across your fleet.

Rewire


Every fleet deserves a good electrical system.

We all know the proverb "a chain is only as strong as its weakest link," and this is true of your fleet's electrical systems. The more connections you have in a system, the weaker that system will be and the harder your fleet's electrical system will have to work, burning more fuel in the process. So, when you take a vehicle off the road for repairs, make checking the electrical system central to the list. Especially for older vehicles, you'll likely find you can replace less efficient cabling and connections with more energy efficient components that need fewer connections.

Similarly, check the gauge of cable used in repairs. Improperly sized cable can cause problems across your fleet, and fuel efficiency is just one of those problems. The right cable alone might save you not just fuel, but aggravation.

Drive Smarter

Finally, make a point of talking to your fleet's drivers about idling. It can be easy to burn fuel when you're not the one paying for it, and drivers may have unconscious habits built from long experience. By working with your team on how to reduce their fuel usage, fleets save money and drivers save time refueling, so everybody wins.


If your fleet needs an electrical system upgrade to improve its fuel efficiency, start by taking a look at our wire and cable products.

 

Topics: Resources & Tools, Fleet Management


 

Wired2ServeBlog_Subscribe-2.jpg

Subscribe to Email Updates

About the Wired2Serve Blog

"Wired to Serve™" is more than just a saying to us. It's who we are, how we live and everything we do, from the way we answer your call, to the products we stock for you.

In this spirit of service, we launched the Wired2Serve Blog to share industry news, helpful advice and other insider info to make your workdays easier and more enjoyable.

Keep your finger on the pulse of the 12-volt electrical industry - subscribe below and be the first to know when new articles are published.

Know that we would never sell or trade your personal info and promise not to spam you either - we know you're far too busy for that.

Subscribe to the Wired2Serve Blog